Página 1
Model 416348 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Prefer the phone? Call 1-800-523-3987. English pg 1-14 Français pg 15-17...
Página 2
Table of Contents Assembly Tools Required Part Identifi cation No. 2 Phillips Screwdriver Tip Shown Actual Size Hardware Identifi cation Assembly Steps 5-14 Hammer Not actual size Français 15-17 Español 18-20 Safety 21-22 Warranty Page 2 416348 www.sauder.com/services...
Use this part identifi cation to help identify similar parts. RIGHT END (1) LEFT END (1) TOP (1) BOTTOM (1) BACK (1) ADJUSTABLE SHELF (2) END MOLDING (2) TOP MOLDING (1) M50 BASE (1) SHELF MOLDING (2) www.sauder.com/services 416348 Page 3...
Página 4
NAIL - 30 CAM COVER - 4 HOLE PLUG - 3 METAL PIN - 8 BLACK 9/16" LARGE HEAD SCREW - 11 BLACK 1-7/8" FLAT HEAD SCREW - 1 BLACK 1-1/8" PAN HEAD SCREW - 3 Page 4 416348 www.sauder.com/services...
Página 5
BOTTOM (F). Then, insert the metal end of a CAM DOWEL (2F) into each HIDDEN CAM. Do not tighten the HIDDEN CAMS in this step. Arrow (8 used) Arrow Arrow Insert the metal end of the CAM DOWEL into the HIDDEN CAM. www.sauder.com/services 416348 Page 5...
Página 6
Tighten Risk of damage or Arrow injury. HIDDEN CAMS must be completely Arrow Maximum tightened. HIDDEN 210 degrees CAMS that are not completely tightened may loosen, and parts may separate. To Minimum completely tighten: 190 degrees Page 6 416348 www.sauder.com/services...
Página 7
Fasten the TOP (E) to the ENDS (A and B). Tighten four å HIDDEN CAMS. These holes must be here. S u r f a c i t h h o l Maximum Arrow 210 degrees Minimum 190 degrees www.sauder.com/services 416348 Page 7...
Página 8
NOTE: Do not overtighten the SCREWS into the TOP. å Push three HOLE PLUGS (26P) into the TOP MOLDING (M28). å Angled edge BLACK 1-1/8" PAN HEAD SCREW (3 used in this step) Do not overtighten the SCREWS (9S). Page 8 416348 www.sauder.com/services...
Página 9
Step 5 Slide the END MOLDINGS (K) onto the notched edges of å the ENDS (A and B). * U.S. Patent No. 5,499,886 å Notched edge Notched edge Groove Groove www.sauder.com/services 416348 Page 9...
Página 10
Fasten the BASE (M50) to the ENDS (A and B) and BOTTOM (F). å Use fi ve BLACK 9/16" LARGE HEAD SCREWS (1S) through the ANGLE BRACKETS on the ENDS and BOTTOM and into the BASE. BLACK 9/16" LARGE HEAD SCREW (10 used in this step) Angled edge Page 10 416348 www.sauder.com/services...
Página 11
"square". Fasten the BACK (H) to your unit using the NAILS (1N). The å NAILS should be 5" apart and 1/4" in from the edges. 5" 1/4" NAIL (30 used in this step) www.sauder.com/services 416348 Page 11...
Página 12
Step 8 Slide a SHELF MOLDING (N) onto the notched edge of å each ADJUSTABLE SHELF (J). * U.S. Patent No. 5,499,886 å These surfaces should be even. Notched edge Groove Page 12 416348 www.sauder.com/services...
Página 13
Carefully stand your unit upright. å Insert the METAL PINS (1R) into the hole locations of å your choice in the ENDS (A and B). Set the ADJUSTABLE SHELVES (J) onto the METAL PINS. (8 used) www.sauder.com/services 416348 Page 13...
Página 14
BLACK 1-7/8" FLAT HEAD SCREW (1 used into a stud in your wall) BLACK 9/16" LARGE HEAD SCREW (1 used into the top of your unit) 35 lbs. 25 lbs. 25 lbs. 50 lbs. (4 used) To cover HIDDEN CAMS Page 14 416348 www.sauder.com/services...
Modèle 416348 Bibliothèque avec 3 Tablettes Utilisez les instructions d’ a ssemblage en français avec les NOUS SOMMES LA POUR VOUS AIDER! schémas étape par étape du manuel d’instruction en anglais. Nous faisons de notre mieux pour nous assurer que votre meuble Chaque étape en français correspond à...
Página 16
Fixer le SOCLE (M50) aux EXTRÉMITÉS (A et B) et au Fixer le DESSUS (E) aux EXTRÉMITÉS (A et B). Serrer quatre DESSOUS (F). Utiliser cinq VIS NOIRES TÊTE LARGE 14 mm (1S) EXCENTRIQUES ESCAMOTABLES. à travers les CONSOLES À ÉQUERRE et dans le SOCLE. Page 16 416348 www.sauder.com/services...
Página 17
REMARQUE : Prière de lire attentivement les importantes informations concernant la sécurité qui fi gurent sur les pages arrière du manuel d’instructions. Ceci complète l’ a ssemblage. Pour nettoyer, utiliser l’encaustique pour meubles préférée ou un chiff on humide. Essuyer. www.sauder.com/services 416348 Page 17...
Modelo 416348 Librería con 3 Estantes Use estas instrucciones de ensamblaje en español junto con las ESTAMOS AQUI PARA AYUDAR! fi guras paso-a-paso provistas en el folleto inglés. Cada paso Tratamos de asegurar que su mueble llega en condición excelente.
Página 19
Fije la BASE (M50) a los EXTREMOS (A y B) y al FONDO (F) cuatro EXCÉNTRICOS ESCONDIDOS. Utilice cinco TORNILLOS NEGROS DE CABEZA GRANDE de 14 mm (1S) a través los SOPORTES ANGULARES y en la BASE. www.sauder.com/services 416348 Page 19...
Página 20
NOTA: Por favor lea las páginas fi nales del folleto de instrucciones para información importante sobre la seguridad. Esto completa el ensamblaje. Limpie con su pulimento para muebles preferido o un paño húmedo. Seque con un paño. Page 20 416348 www.sauder.com/services...
Página 21
Les téléviseurs peuvent être un téléviseur. cet eff et. particulièrement lourds. De plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. www.sauder.com/services 416348 Page 21...
Página 22
Además, el peso y la ubicación del tubo de imagen tienden a causar la inestabilidad de televisores y propensa a volcarse hacia adelante. Page 22 416348 www.sauder.com/services...
à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
Página 24
Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built. If you Nice.