Work Pro CLUBMASTER 1 PH Instrucciones De Usuario página 4

EN
CHANNEL CONTROLS & FUNCTIONS
8
9
10
11
12
13
12. BAL
The BAL control sends continuosly variable amounts of the post fader signal to either the left or right.
In the center position equal amounts of signal are sent to the left and right.
13. PFL
You can listen the signal of the only channel which PFL switch is turned "ON". So PFL routes the
channel signal to the monitoring system (Vumeter and headphones). If more than one PFL is
selected, the mixer shows the sum of them
14. CHANNEL FADER
60 MM fader. Its function is to adjust the volume of signal connection into each channel and
adjust the output volumen together with Master fader.
THIS CONTROLS AND FUNCTIONS ARE AVAILABLE FOR CHANNELS 1 - 6
CLUB MASTER 1 PH
STEREO CHANNELS
14
User Manual/Manual de Instrucciones
8. INPUT SOURCE SELECTOR
You can select whic source connected on this
channel is ready to be mixed. This function is
present on channels 1 to 6, depending on each
channel, you can select different type of source
(LINE, PHONO, CD)
9. HIGH
Control the high frequency tone of each channel.
Always set this control to the 12 o´clock position,
but you can control the high frequencies tone
according to the speaker, the conditions of
listening position and listener´s taste. Clockwise
rotation of the control, increases the level.
10. MID
Control the high frequency tone of each channel.
Always set this control to the 12 o´clock position,
but you can control the mid frequencies tone
according to the speaker, the conditions of
listening position and listener´s taste. Clockwise
rotation of the control, increases the level.
11. LOW
Control the high frequency tone of each channel.
Always set this control to the 12 o´clock position,
but you can control the low frequencies tone
according to the speaker, the conditions of
listening position and listener´s taste. Clockwise
rotation of the control, increases the level.
Pag 3