GPO Westwood Manual Del Usuario página 8

Operation Instructions: Bluetooth Mode
To use you use your GPO Westwood speaker with Bluetooth
connection, please follow the instructions below:
• Connect the power cable to the speaker by inserting the jack plug
into the DC-IN port, and then connect the plug to a mains power
socket.
• Rotate the power dial clockwise until you hear a "click", this will
turn the speaker on.
• The blue light underneath the Bluetooth function (BT) will light up
and begin to flash. This means that the unit is searching for another
Bluetooth device to pair with.
• Visit the Bluetooth app or setting on your device and ensure that it
is switched on. You may need to click "search for other devices".
Please also make sure that your device is set to 'discoverable'.
• Your speaker will appear as "GPO", select this. Once you have a
successful connection between the speaker and your device
"GPO" will appear in the "my devices" or "paired devices" section
on you device and the blue flashing light on the speaker will
become solid.
• Visit your music app on your phone and press play. You will need to
control your music from your device. Please be aware that the
volume can be controlled on the speaker by the volume button and
on the volume controls on your device.
• When music is successfully playing through your Westwood
speaker the blue light will flash slowly. Turn the bass and treble
dials to achieve the sound you desire.
• To disconnect your device from the Bluetooth connection with your
speaker, simply turn the Bluetooth off on your phone, switch off the
speaker or press the function button if you choose to connect to
the speaker a different way.
8