GPO Westwood Manual Del Usuario página 9

• To turn your GPO Westwood off, rotate the power dial anti-clock-
wise until you hear a "click". Disconnect the jack plug from the
DC-IN port, followed by the plug from the mains power source.
How To Connect Your GPO Record Player
To connect your GPO Westwood speaker to a GPO record player:
• Turn your GPO Westwood speaker on using the above
instructions.
• Using the aux cable provided, insert the red and white jacks into
the corresponding coloured plugs on the back of your GPO
record player. Then insert the 3.5mm jack on the other end of the
cable into the 3.5mm jack port underneath "AUX IN" on your
GPO Westwood speaker.
• Play music from your GPO record player as normal, the sound
will exit from your GPO Westwood speaker. You can control the
volume on your record player and your speaker. Turn the bass
and treble dials to achieve the sound that you require.
• To disconnect the speaker from your record player, ensure both
units are switched off correctly according to guidelines provided
by ProTelX (GPO manufacturers). Then disconnect all cables
from your speaker and record player.
9