Operation - KLS Martin group MedLED Sapphire Instrucciones De Uso

Instructions for Use
Headlight MedLED Sapphire
5

Operation

Please read chapter 4 "Charging instructions", page 27, before continuing to read these
operating instructions:
Headlight MedLED Sapphire
Headlight MedLED Onyx
NOTICE
Risk of eye damage!
Do not shine the Headlight MedLED Sapphire
beam is pointing directly at your eyes, turn your head away from the light beam.
Further useful information can be found in chapter 9 "Rheostat operating instructions",
page 34.
V. 1.0
™ ™
and Onyx
• Adjust the headband to fit your head size. To do so, first
place the device on your head. Now adjust the width by
turning the knob at the back and the height by adjusting
the Velcro fastener on the top (1).
• Switch on the device by pushing the lever (2) upwards
slightly. While wearing the headlight on your head, look
down and adjust the brightness level as desired by
pushing the lever (2) upwards as far as necessary.
• Adjust the orientation of the light beam by using the
headlight's movable pivot joints (3)
™
• Adjust the size of the light field:
— Sapphire
the lamp casing (4).
— Onyx
™
™
: by using the control knob on the top of
™
: by turning the lamp casing (4).
™ ™
/ Onyx directly into your eyes. If the light
29