Technical Data - KLS Martin group MedLED Sapphire Instrucciones De Uso

8

Technical data

Designation
Brightness
Operating hours
Size of illuminated field
-Working distance
-Diameter of small
illuminated field
-Diameter of extended
illuminated field
Charging time before
first use
Charging time
Temperature
Weight
-with 1 battery
-with 2 batteries
Power source
Power consumption
Light source
Estimated lifetime for
LED chip
Battery data
-Weight
-Rated output
-Rated voltage
-Capacity
-Lifetime
32
Specification Sapphire
Up to 200,000 lux (max. brightness)
6.5+ hours per charge (max.
brightness)
Further useful information can be
found in chapter 9 "Rheostat
operating instructions", page 34.
25 – 46 cm
3,5 – 6,5 cm
4,5 – 8,5 cm
16 – 24 hours
6 hours
Reference colour temperature
5,000 K
255 g
310 g
1 or 2 LiPo batteries
1 W – 3.6 W (max.)
High-performance white LEDs
Class 1M / EN 60825-1:1997
10,000+ hours. The LED bulbs do
not need to be changed
Approx. 48 g
At least 2,160 mAh,
typically 2,260 mAh
3.7 V
8.4 Wh
> 500 charge cycles at > 70% of
initial capacity
Headlight MedLED Sapphire
™
Specification Onyx
Up to 100,000 lux (max. brightness)
6.5+ hours per charge (max.
brightness)
Further useful information can be
found in chapter 9 "Rheostat
operating instructions", page 34.
25 – 46 cm
2 cm
6 – 10 cm
16 – 24 hours
6 hours
Reference colour temperature
5,000 K
325 g
375 g
1 or 2 LiPo batteries
1 W – 3.6 W (max.)
High-performance white LEDs
Class 1M / EN 60825-1:1997
10,000+ hours. The LED bulbs do not
need to be changed
Approx. 48 g
At least 2,160 mAh,
typically 2,260 mAh
3.7 V
8.4 Wh
> 500 charge cycles at > 70% of
initial capacity
Instructions for Use
™ ™
and Onyx
™
V. 1.0