How To Use - Vornado VH2 Guia Del Propietario

HOW TO USE

Before use, check appliance for visible damage. DO NOT USE THIS HEATER if there is evidence of damage. If any damage is found, contact
Vornado Air LLC at 1-800-234-0604.
1. Use integrated handle on back of heater
for lifting and carrying.
2. Position heater so airflow is
not obstructed.
3. Plug power cord into standard grounded
wall outlet.
4. Press the power button (I/O) and select a Mode
. Power button is illuminated when powered
On. Set thermostat to desired temperature using
thermostat knob.
FAN SWITCH
Continuous (high)
Fan will run continuously regardless of heat
output.
Automatic (auto)
Fan will cycle on or off with the heating element.
FAN ONLY
To use as a fan year-round, turn knob to fan only
setting and press "High" on Fan Switch. The fan
will run continuously.
English
9