T3 CONVERTIBLE Serie Manual De Usuario página 7

OPERATING INSTRUCTIONS
12
CONVERTIBLE COLLECTION
The barrels in the Whirl Trio, Whirl Convertible, and Twirl Convertible
are all interchangeable. The barrels sold separately can be used with
the above mentioned tools or with the Convertible Base. Each of the
barrels can assist in styling a variety of looks.
1
Line up the on the Barrel Lock
with the on the handle. Align
the 3 side pins in the barrel with
the side slots in the handle and
insert the barrel firmly into the
handle.
2
Rotate the Barrel Lock until it
clicks. The on the Barrel Lock
should line up with the
handle when the barrel is securely
fastened.
NOTE: Wait for the barrel to cool before removing it. Grasp the barrel
with one hand and turn the Barrel Lock with the other hand to unlock
the barrel. Then pull the barrel out of the handle.
Side Pin
Slots
Side Pin
Barrel Lock
on the
OPERATING INSTRUCTIONS
CONVERTIBLE COLLECTION
1
Press the Power & Temperature
Switch to turn the wand on. Lights
will cascade up, then turn solid
when the unit is ready to use.
To turn the wand off, hold the
Power & Temperature Switch
down until all lights turn off.
2
To change the temperature*,
double click the Power &
Temperature Switch until the
lights flash. Then continue to click
to cycle through the temperature
settings.
3
Release the Power & Temperature
Switch after reaching your desired
temperature. The selected
temperature light(s) will flash, and
all lights will cascade up or down
to your selected temperature.
Wait for the lights to turn solid
before using the wand.
*See Temperature Guide in Operating Instructions for
recommended settings.
13
Power &
Temperature
Switch
Power &
Temperature
Switch
Power &
Temperature
Switch