•
Surfaces are liable to get hot during use.
• The connector must be removed before the
appliance is cleaned.
The appliance inlet must be dried before the
appliance is used again.
• The appliance must not be immersed.
• Only the appropriate connector must be used.
• Regarding the instructions for cleaning surfaces in
contact with food or oil, refer to the section
"Cleaning and Maintenance" on page 6 of the
manual.
• The appliance is not intended to be operated by
means of an external timer or separate remote
control system.
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using the appliance and save for
future reference.
•Turn off and unplug the appliance from the mains socket when not in use
and before cleaning.
•The use of attachments other than those supplied by the manufacturer is not
recommended.
•Extreme caution must be used when moving an appliance containing hot oil
or other hot liquids.
•The oil in the fryer will stay hot for some time after it has been switched off.
Never attempt to move the fryer until it has completely cooled.
•Never operate the fryer with the oil level below the minimum mark or above
the maximum mark.
•Always insert the control panel assembly in the removable pot before
plugging the appliance into the mains socket.
•Do not heat without food inside.
•Do not open the lid when frying.
2
EN