For your own personal protection and for the safety of those around you, please read and ensure you fully understand the following
safety information. It is the responsibility of the operator to ensure that he/she fully understands how to operate this equipment safely.
If you are unsure about the safe and correct use of the BMD Minidumper, consult your supervisor or Belle Group.
Improper maintenance can be hazardous. Read and Understand this section before you perform any
WARNING
maintenance, service or repairs.
•
This equipment is heavy and must not be lifted single-handedly, GET HELP and use suitable lifting equipment.
•
Cordon off the work area and keep members of the public and unauthorized personnel at a safe distance.
•
Personal Protective Equipment (PPE) must be worn by the operator when ever this equipment is being used (see Health & Safety).
•
Make sure you know how to safely switch this machine OFF before you switch it ON in case you get into diffi culty.
•
Always switch OFF the engine before transporting, moving it around the site or servicing it.
•
During use the engine becomes very hot, allow the engine to cool before touching it. Never leave the engine running and
unattended.
•
Never remove or tamper with any guards fi tted, they are there for your protection. Always check guards for condition and
security, if any are damaged or missing, DO NOT USE THE BMD MINIDUMPER until the guard has been replaced or repaired.
•
Do not operate the machine when you are ill, feeling tired, or when under the infl uence of alcohol or drugs.
•
Do not stand the machine on end with the engine running.
•
Do not use the BMD Minidumper to transport people.
•
Do not release the brake suddenly when travelling forward at speed with a heavy load as the machine may topple forward.
•
When travelling downhill, engage the reverse gear with the clutch lever fully engaged and parking brake lever pressed down
(brake off). Close the throttle if necessary so that engine braking controls the speed.
•
Always ensure that when moving downwards on a hill, the machine is travelling in reverse.
Fuel Safety
Petrol is fl ammable. It may cause injury and property damage. Shut down the engine, extinguish all open
WARNING
fl ames and do not smoke while fi lling the fuel tank. Always wipe up any spilled fuel.
•
Before refuelling, switch off the engine and allow it to cool.
•
When refuelling, DO NOT smoke or allow naked fl ames in the area.
•
Spilt fuel must be made safe immediately, by using sand. If fuel is spilt on your clothes, change them.
•
Store petrol in an approved, purpose made container away from heat and ignition sources.
•
If fuel is spilt when re-fuelling the tank, wipe off the excess and wait 2 minutes before re-starting.
Vibration.
Some vibration from the operation is transmitted through the handle to the operator's hands. DO NOT exceed the maximum usage times.
(See Technical Data section)
PPE (Personal Protective Equipment).
Suitable PPE must be worn when using this equipment i.e. Safety Goggles, Gloves, Ear Defenders, Dust Mask and Steel Toe capped
footwear. Wear clothing suitable for the work you are doing. Tie back long hair and remove any jewellery which may catch in the equip-
ment's moving parts.
Petrol Machines.
Fuel.
Do not ingest fuel or inhale fuel vapours and avoid contact with your skin. Wash fuel splashes immediately. If you get fuel in your eyes,
irrigate with copious amounts of water and seek medical attention as soon as possible.
Exhaust Fumes
WARNING
The exhaust fumes produced by this equipment are highly toxic and can kill!
Do not operate the BMD Minidumper indoors or in a confi ned space, make sure the work area is adequately ventilated.
All manuals and user guides at all-guides.com
General Safety
Health And Safety
9
GB
GB