Product Description - DBI SALA 8518040 Manual Del U

;
Prior to installation and use of this equipment, record the product identification information from the ID label in the
Inspection and Maintenance Log (Table 3) at the back of this manual.
;
Always ensure you are using the latest revision of your 3M instruction manual. Visit the 3M website or contact 3M
Technical Services for updated instruction manuals.

PRODUCT DESCRIPTION:

Figure 1 illustrates the 3M™ DBI-SALA
person for the purpose of raising or lowing them to a workspace. This instruction covers Advanced Variable Offset Masts with an
offset range of 24 inches (61 cm) to 44 inches (112 cm). All one-piece davits (8518385, 8518386, and 8518387) must not be
used with mast extensions or the Portable Base (see Figure 8). The Advanced Variable Offset Mast (Figure 7) may be equipped
with front mounted and/or back mounted winches (A) and Self-Retracting Devices (SRDs). When using the 8518006 davit with
a fixed base, a maximum of two mast extensions/lower masts may be combined, but must not exceed 78 inches (198.1 cm) in
height.
As illustrated in Figure 10, the Offset Mast is equipped with two pulleys (A3, A4) and a U-bracket (A2), which are rated as OSHA
approved fall arrest anchor points when used with a device with a 900 lbf (4 kN) average arresting force. The mast mounted
U-bracket (A1) is rated as an 5,000 lbf (22 kN) anchor point when used within 15 inches (38 cm) of the base.
Figure 2 illustrates the components of the Davit System.
Specifications:
Capacity:
Material Handling:
System Weights:
Component Specifications:
Figure 2
Reference Component
A Variable Offset Mast
B Lower Mast
C Hoist Base
D Pulleys
Hardware
Anchorage Requirements:
Moment Load for the Structure
Vertical Load for the Structure
;
Structure resistance validation and installation execution must be performed by a Qualified Person
1 Qualified Person:
An individual with a recognized degree or professional certificate, and extensive experience in Fall Protection. This individual must be capable
of design, analysis, evaluation, and specification in Fall Protection.
Advanced Adjustable Offset Davit System. The System is designed to be attached to a
®
Table 1 – Specifications
One person with a combined weight (clothing, tools, etc.) of no more than 310 lb. (141 kg).
450 lb. (205 kg) maximum load
8518006 - 31 lb. (14 kg)
8518385 - 40 lb. (18 kg)
8518386 - 44 lb. (20 kg)
8518387 - 50 lb. (23 kg)
8518040 - 138 lb. (62 kg)
8518008 - 116 lb. (53 kg)
Materials
Aluminum
Aluminum
Aluminum
Nylon
Steel/Stainless Steel
80,000 in-lb (9.0 kN-m)
5,000 lbf (22 kN)
10
.
1