•
If the "
" symbol appears, this means that the individual heating area is
overheated (e.g. due to the presence of an empty pan or metal objects).
•
If the letter "
or another letter, this means there is a fault (please contact the Technical
Assistance Service).
2.5
Warning
If one or more controls in an incorrect sequence are pressed for more than
ten seconds, the hob goes into error mode, the cooking areas are switched off
automatically and a buzzer sounds, being repeated about every 10 seconds.
When the cause of the error is removed (for example dirt or an object on the
controls area) the buzzer is deactivated and the hob can be used again.
3.1
Maintenance and cleaning
Before each operation, disconnect the appliance from the mains.
After each use, when cool, clean the hob eliminating even the small residues
which, when the hob is switched on again, can become impossible to remove.
Only use suitable products, avoiding steel wool pads, abrasive sponges and
powder detergents as these products can scratch the surface of the glass.
Sprays to clean ovens are not suitable as they are aggressive and damaging
for the surface of the glass.
Slight residue can be removed with a damp cloth or with hot soapy water.
Ring marks from soap can be removed with water which must be dried using
a soft cloth.
Marks of scale, caused by boiling liquids overflowing from the containers, are
removed with vinegar, lemon or an anti-scale product.
Eliminate residues of detergent as, the next time they heat up, they could
become aggressive for the glass.
For resistant and hardened incrustations we recommend using a scrape for
windows with a metallic blade which can easily be found on the market (see
figure).
Do not use jets of steam for cleaning.
To remedy any anomalies of functioning, please contact qualified personnel.
" appears on one or more displays alternating with a number
INSTRUCTIONS FOR USE
27 / GB