MEI EC6000 Guía De Puesta En Marcha página 7

General LED Light Codes
G
R
G
G
A
A
R
Amber LED Light Codes
If the amber LED flashes, this indicates that a fault has been detected on one of
the EC6000 main modules. These types of fault can be rectified at the machine
and can be for example caused by; a coin jam; dirt built up; or the cassette has
been removed etc. The EC6000 will also indicate the module affected on its
display.
On - EC6000 OK.
Cycles x 5 - Normal power up sequence.
A G
Blinks Off - Coin accepted / rejected.
Flashing - EC6000 in service mode
On – EC6000 inhibited by VMC.
Flashing - EC6000 requires attention.
(Refer to Amber LED light codes)
Off - No Power to EC6000.
(Check power looms are connected & ensure
power is switched ON)
Alternating - EC6000 Faulty
G
(Remove from vending machine)
Flashes
1 x
A
2 x
A
3 x
A
4 x
A
EC6000 OK.
Check EC6000 Module
Discriminator
Accept gate
Separator module
Dispenser module
Page 7 of 10