4. Connect the 20+4-Pin ATX cable to the motherboard.
5. Connect the 4+4-Pin EPS12V cable to the motherboard.
6. Connect the 6/6+2-Pin PCI-E cables to your graphic card(s).
NOTE: Do not attempt to plug an 8-Pin PCI-E cable into a 6-Pin
connector without first detaching the two extra pins.
7. Connect SATA power cables to all data drives or optical drives.
(hard drives, solid state drives, optical drives)
8. Connect the peripheral "Molex" 4-Pin connectors for fans, pumps,
legacy components and other devices/adapters.
9. Connect the AC power cord to your power supply and to the wall.
Check all connections to assure a solid connection and turn the
power switch on the power supply to the ON position.
English
450W / 500W / 600W / 700W BRONZE
Power Supply User Manual
4
EVGA 450B Cable Configuration
Connector
Cables
MB
1 x ATX 20+4-Pin
CPU
1 x EPS/ATX12V 8(4+4)-Pin
VGA
1 x PCI-E 8(6+2)-Pin
SATA
2 x SATA 5-Pin x 2
PERIF
1 x Molex 4-Pin x 3 + 1 Floppy
EVGA 500B Cable Configuration
Connector
Cables
MB
1 x ATX 20+4-Pin
CPU
1 x EPS/ATX12V 8(4+4)-Pin
VGA
1 x PCI-E 8(6+2)-Pin x 2
SATA
2 x SATA 5-Pin x 3
PERIF
1 x Molex 4-Pin x 3 + 1 Floppy
EVGA 600B Cable Configuration
Connector
Cables
MB
1 x ATX 20+4-Pin
CPU
1 x EPS/ATX12V 8(4+4)-Pin
VGA
1 x PCI-E 8(6+2)-Pin x 2
SATA
2 x SATA 5-Pin x 3
PERIF
1 x Molex 4-Pin x 3 + 1 Floppy
EVGA 700B Cable Configuration
Connector
Cables
MB
1 x ATX 20+4-Pin
CPU
1 x EPS/ATX12V 8(4+4)-Pin
VGA
1 x PCI-E 8(6+2)-Pin x 2
SATA
3 x SATA 5-Pin x 3
PERIF
1 x Molex 4-Pin x 4 + 1 Floppy
450W / 500W / 600W / 700W BRONZE
Power Supply User Manual
5
English