Track Button; Front View - Ibiza sound ULTRA-STATION Manual De Instrucciones

14. REPEAT: Press the REPEAT button once to activate the function and repeat the selected track. Press RE-
PEAT again to activate the REPEAT ALL function and repeat all tracks on the CD. Press the REPEAT button
again to deactivate the repeat function.
15. PROG BUTTON: In Stop mode, you can program several tracks (20 tracks max.):
Press the STOP button to enter into stop mode
Press the PROG button to enter into program mode
Choose a track via the Skip track buttons and press the PROG button to save your choice.
Use once more the Skip Track buttons to choose the next track you want to listen to and press the PROG
button to save your choice.
Repeat the operation to select up to 20 tracks you want to listen to.
Press the PLAY/PAUSE button to start playback
16. RELOOP BUTTON: Use this button to start the last saved loop. To finish the loop, press the RELOOP button
again.
17. SEARCHBUTTONS: Lets you browse in forward or backward direction through the track.
18. LOOP IN BUTTON: Sets the starting point of your loop.
19. LOOP OUT BUTTON: Sets the end point of your seamless loop and starts the playback of the loop. Press
again to exit the loop.
20. DSP/REVERSE: Press the Reverse button to play your track in reverse direction. Press again to cancel
reverse play.
21. DSP/BRAKE: In play mode: press the brake button first and then the Play/Pause button. The operation
changes slowly from Play to Pause. Press the Play/Pause button again to exit this function.
22. HOTCUE 1-3 BUTTONS: Use these 3 buttons to set Cue points.
23. DELETE button: Hold the DELETE button and press CUE 1 – 3 which is storing the Cue point you wish to
delete.
24. CUE BUTTON: Press the Cue button during play to return to the position where the play has started.
25. PLAY/PAUSE BUTTON: Each time you press the Play/Pause button, the operation changes from Play to
Pause or from Pause to Play.
26. USB PORT: Connect your USB drive containing the MP3 files.
27. TRACK BUTTON: Skip from track to track for folder navigation.

FRONT VIEW

1. DISC TRAY
2. BT SYNC: Press this button to search for pairing devices. The LED flashes during search. Select ULTRA-STA-
TION in your Bluetooth list. The LED remains lit when pairing has been successful.
3. CUE LEVEL CONTROL: Adjusts the cue volume
4. HEADPHONE JACK: Connect a headphone to this socket to monitor the sound.
MIXING CONSOLE
1. INPUT TOGGLE SWITCH: Assign an input source such as CD/USB, LINE/PHONO
Bluetooth to the channel.
2. MASTER LEVEL: Adjusts the master level output signal.
3. CH1 & CH2 GAIN CONTROL: Adjusts the level of CH1 & CH2
4. HIGH FADER 1-2: Adjusts the high frequencies of channel 1 & 2
5. MID FADER 1-2: Adjusts the mid frequencies of channel 1 & 2
6. LOW FADER 1-2: Adjusts the low frequencies of channel 1 & 2
7. BALANCE VOLUME: Adjusts the level of the balanced XLR output
8. BOOTH VOLUME: Adjusts the Booth output level
9. MIC LEVEL: Adjusts the volume of the microphone
10. CUE/MIX/PGM CONTROL: Turn counterclockwise to monitor the assigned Cue
signal. Turn to the center position to monitor the CUE MIX. Turn clockwise to
monitor PGM output.
11. CUE FOR CH1-2: Switch to CH1 or CH2 to listen to channel 1 or 2 in the Cue
channel.
4
MANUAL - ULTRA-STATION
or
ULTRA-STATION