MANUAL - ULTRA-STATION
12. CHANNEL FADER: Adjusts the audio level on the corresponding channel.
13. LED METER: Indicates the master output level.
14. REPLACEABLE CROSSFADER: Achieves a clean transition between the two input channels. In the left posi-
tion, only channel 1 is audible. In the right position, only channel 2 is audible. In the center position, both
channels are audible.
CONNECTIONS
15. AC IN: Connection cable to the mains outlet.
16. POWER BUTTON: Press to turn the unit on or off.
17. BOOTH OUTPUT: Connect this output to a booth monitoring system
18. XLR output: Connect this low impedance XLR output to a PA system or powered monitors.
19. MASTER OUTPUT: Use a standard RCA lead to connect this output to a speaker or amplifier system.
20. REC OUTPUT: Use a standard RCA lead to connect this output to a recording device.
21. INPUT: Connect a line level device such as a tape deck or additional CD player.
22. LINE/PHONO INPUT SWITCH: Set the switch to LINE or PHONO depending if you wish to connect either a
line level or a phono level equipment to your channel input. If PHONO is selected, the signal is fed directly
into the high-quality RIAA phono pre-amplifiers. Line level sources would overload the sensitive phono
pre-amps and the sound would be very bad. SO, always make sure to toggle the line/phono switch to line
before you connect line sources.
23. DJ MIC: Plug an XLR type microphone
24. MIC INPUT: Plug a 6.35mm Jack microphone.
SPECIFICATIONS
Power supply ...................................................................................................................................... 100 240V~ 50/60Hz
Consumption ...............................................................................................................................................................20W
BT frequency ............................................................................................................................................ 2.402-2.480GHz
Max. RF power of BT .................................................................................................................................................4dBm
USB voltage .......................................................................................................................................................5V 500mA
Max. capacity of USB device ....................................................................................................................................128Gb
Dimensions ........................................................................................................................................ 528 x 312 x 105mm
Weight ....................................................................................................................................................................... 6.1kg
Correct disposal of the product
This marking indicates that this product should not be disposed with other household wastes throughout
the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material resources. To return your used device,
please use the return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
5