Image; Picture Control Settings - flir MPX C23 Serie Guia Del Usuario

3 Advanced Menu
3. Move the control stick ↑ / ↓ to select SMART IR, then ← / → to turn Smart IR ON or
OFF.
4. Select SMARTIR LVL, then move the control stick ← / → to set the Smart IR level.

3.5 Image

Set the picture and display control settings for the camera.

3.5.1 Picture Control Settings

To configure picture control settings:
1. From the main menu, use the control stick to select ADVANCED. Push the middle of
the control stick to confirm.
2. Move the control stick ↑ / ↓ to select IMAGE. Push the middle of the control stick to
confirm.
3. Move the control stick ↑ / ↓ to select SHARPNESS, then ← / → to set the sharpness
level. It is recommended to use the default value for image sharpness.
#LX400044; r. 2.0/22410/22410; en-US
14