First Use; Operating Modes; Control Panel - Elnur Gabarron BRISS Instrucciones De Instalacion Y Uso

FIRST USE

1. Open the box and unpack the product.
2. Make sure there is enough space to pull all parts before starting assembly
3. Necessary to remove the water tank to fill it.
4. Put clean water until MAX signal. Replace the water tank at its place and dry any pie-
ce of water. If you have any difficulty placing the tank in the correct positionm, please
read "cleaning and maintenance"
5. To use ice cubes, open the tank and insert them inside the water tank
6. Plug in the unit

OPERATING MODES

Control panel

1-
a.
b.