CAPITAL SPORTS Infinity Edge Manual Del Usuario página 42

EN
42
Set values in the 3 countdown modes
The countdown starts automatically after you have set the values and pressed
START. Cycle: time > distance > calories.
TIME
CALORIES
DISTANCE
Body fat measurement
Press PROGRAM until [FAT] is displayed. Then press MODE to set the
following parameters:
• F1 - gender (01 male / 02 female)
• F2 - age (10-99)
• F3 - height (100-220 cm)
• F4 - weight (20-150 kg)
When you have set all the values, [5] will be displayed. Place your hands on the
pulse sensors on the handrail. After 5-6 seconds, the computer displays FAT
information. FAT measures the relation between your height and weight, not
body proportions.
• A value below 20 means underweight.
• A value of 20-25 means normal weight.
• A value of 26-29 means overweight.
• A value above 29 means obesity.
Note: The results must not be used for diagnostics or any medical
purposes.
Energy saving function
If no action is taken within 10 minutes, the Treadmill will enter Standby Mode
to save power. Press any button to re-activate it.
The default value is 30 minutes. The time can be
adjusted from 8-99 minutes in 1-minute increments.
The default value is 50 calories. The calories can
be adjusted from 20-990 calories in 1-calorie
increments.
The default value is 1 km. The distance can be
adjusted from 1.0-99.0 km in 0.1 km increments.