Goldstar WG8005R Manual Del Propietário página 22

Maintenance and Service
1. If you want to pull out the filter upward,
open the inlet grille slightly. Turn inside
out the front grille.
Disassemble the inlet grille from the front
grille with separating the hinged part by
inserting a '"_" type screw-driver tip.
Rotate the inlet grille 180 degrees and
insert the hooks into the lower holes of
front grille.
Then, insert the filter. (See Figure12, 13)
2.Attach the front grille to the cabinet by
inserting the tabs on the grille into the tabs
on the front of the cabinet. Push the grille in
until it snaps into place. (See Figure14)
Figure12
Figure 13
3. Lift the inlet grille and secure it with a type
A screw through the front grille.
(See Figure 15)
4. If you want to pull out the filter downward,
use the reversible inlet grille without
change.
(The grille is already assembled for that
way.)
igure 15
22 Room Air Conditioner