Webber WS 1125 Manual De Instalación página 54

Explanation of symbols displayed on the indoor unit or outdoor unit (For the unit adopts R32/R290
Refrigerant only):
This symbol shows that this appliance used a flammable refrigerant. If the refrigerant is
WARNING
leaked and exposed to an external ignition source, there is a risk of fire.
CAUTION This symbol shows that the operation manual should be read carefully.
CAUTION
This symbol shows that a service personnel should be handling this equipment with
reference to the installation manual.
CAUTION
This symbol shows that information is available such as the operating manual or instal-
CAUTION
lation manual.
CONTENTS
1. Safety precautions
2. Parts supplied
2.1 Parts supplied for the WSCS 11xx models
2.2 Parts supplied for the WS 11xx models.
3. Activities prior to the installation of the air conditioner for the WSCS 11xx models.
4. Activities prior to the installation of the air conditioner for the WS 11xx models.
5. Positioning of the indoor and outdoor unit.
5.1 Positioning of the indoor unit for the WS 11xx and WSCS 11xx models.
5.2 Positioning of the outdoor unit for the WS 11xx and WSCS 11xx
models.
6. Possible options for installing the piping from the inside unit to the outside unit.
7. Mounting the installation plate and drilling holes for piping.
7.1 Mounting the installation plate of the indoor unit.
7.2 Drilling holes for piping, condensed water hose and power cable.
8. Connecting the refrigerant piping.
8.1 Connecting and disconnecting the refrigerant piping for the WSCS 11xx models.
8.2 Connecting the refrigerant piping for the WS 11xx models.
9. Connecting the condensed water drain for the WSCS 11xx and WS 11xx
models.
9.1 Connecting the condensed water drain of the indoor unit.
9.2 Connecting the condensed water drain of the outdoor unit.
10. Electrical installation.
11. Connecting the power cables.
11.1 Connecting the power cables for the WSCS 11xx models.
11.2 Connecting the power cables for the WS 11xx models.
12. Vacuuming the cooling system of the WS 11xx models.
13. Checking leak tightness of the cooling system for the WSCS 11xx and WS 11xx models
models.
14. Adding refrigerant with pipe lengths over 5 meter.
15. Test run after installation for the WS 11xx and WSCS 11xx models.
4
54