Drilling Holes For Piping, Condensed Water Hose And Power Cable - Webber WS 1125 Manual De Instalación

WS1125 WS1125
WS1132 WS1132
WSCS1125
WSCS1132
7.2

Drilling holes for piping, condensed water hose and power cable.

a. Determine the position of the hole according the diagram in Fig. 9. Drill a hole (with a diameter ≥
85 mm for WSCS 11xx / ≥ 65 mm for WS 11xx), directed slightly down in the direction of the outdoor
unit; this will prevent water seeping inside (Fig. 10).
b. Always use a drilling gauge for drilling in metal gratings, metal sheets or similar materials.
Inside
Picture 10
Wall
Outside
Picture 9 Picture 9
4
63