Frigomat T4s Serie Manual De Uso Y Mantenimiento página 69

3. Remove the steel lever that controls the
dispenser disk from the central door pin.
4. Remove the spring.
5. Remove the dispenser disk.
6. Use the OR disassembly device to remove the 2
OR gaskets from their place.
• Immerse the previously disassembled components
into the tub with the sanitising solution and brush the
surfaces with care. Pay special attention to the safety
grid and gaskets.
REMOVING AND CLEANING THE DOOR (T5S)
• Rotate the two knobs to unblock the door outwards,
pull the lower part of the door outwards acting on the
lever handle that controls the dispenser disk.
• Remove the door holding it with both hands.
Handle the door with great care: because of its great
weight, should it fall, it could cause injuries to staff
and damages to things.
• Rest the door on a clean work surface and
disassemble its parts:
1. Remove the plastic lid from the hopper.
2. Unscrew and remove the plastic knob.
3. Remove the steel lever that controls the dispenser
disk from the central door pin.
4. Remove the spring.
5. Remove the dispenser disk.
6. Use the OR disassembly device to remove the 2
OR gaskets from their place.
• Immerse the previously disassembled components
into the tub with the sanitising solution and brush the
surfaces with care. Pay special attention to the safety
grid and gaskets.
ENGLISH - 30