EarthWise QI-JY-1300 Manual Del Operario página 12

Auger (Fig. 9)
CAUTION Check fasteners before each use. A
loose auger can result is excessive vibration and
damage the snow thrower.
To replace the auger:

Remove cover (18), pulley frame (15) and belt (14).

Loosen the nut from the other side of the auger (8)
and dismount the pulley (13) and auger axle (12).

Replace the auger with a new one.

When reassembled ensure all screws and nuts are
properly tightened.
9
10
MAINTENANCE AND STORAGE
Scraper blade (Fig. 10)
The scraper blade is a wear item and should be replaced
when necessary. A worn scraper blade can cause
extreme vibration and damage the auger.
To replace the scraper blade:




12
Remove the three screws.
Replace the scraper blade with a new one.
Secure with the three screws.
Ensure the screws are properly tightened.