Measurement Mode; Black And White Mode - Holex 49 2928_2000 Manual De Instrucciones

32

5.2.1. Measurement mode

Display the measurement grid to measure the size of an object.
en
0,5
0
0,5
1
1,5

5.2.2. Black and white mode

1. Select the menu item
in black and white.
2. Select the menu item
ing the image in full colour.
When images and videos are recorded in black and white, the saved data
are held in black and white.
1. Confirm the menu item
play a centimetre unit of the grid on the
screen.
2. Unscrew the threaded protective ring on the
probe head anticlockwise.
3. Screw back the mounting ring on the probe
head clockwise.
1,5
1 2
4. Screw the distance pin clockwise on to the
probe head.
5. For measurement, align the distance pin per-
pendicular to the surface being measured.
▶ Dimensions can now be read on the screen in
real time.
1. To hide the grid, press the menu item
once again and confirm with
shown. When a video is recorded, the grid will
not be shown.
and confirm with
once again and press
Instruction manual
i
When an image is recorded, the grid will be
with , to dis-
.
to display the live image
to revert to display-