EN
6.
Select Settings>Module Flash from the menu.
7.
Select the option to "Select by Topology" to give visual selection ability to select the appropriate video panel.
Then, select the panel(s) you installed the new LED modules in.
Note: This is a front-view selection, press and hold the SHIFT button to select multiple panels.
8.
Select the button to check coefficients in modules.
9.
This process may take a while with some video panel models.
10. Once the process is complete, you will see a confirmation appear.
11. Once the panels once again look as desired, press the button for Save coefficients in Receiver card.
12. Repeat as needed.
Smart-LCT Workaround
The VIP Drive 43Nova is not a standard Novastar processor, it is customized for Chauvet. As such, it is not able to work
with SmartLCT by default. However, there is a way to make it work, by placing the VD43 device file into the devices folder
on the local machine.
When installing the VIP Drive 43 Nova (VD43) the VD43.XML file must be copied into the following directory:
Windows
LOCAL DISK>PROGRAM FILES (X86)>NOVA STAR>SMARTLCT>BIN>DEVICES
10
CHAUVET VIDEO PRODUCTS
Novastar Troubleshooting Guide
Revision 1