Xtech XTH-700 Guía De Usuario página 5

- Although the case and earphones can be charged at the same time, it is
recommended to fully charge the case's battery before charging the
earphones for the first time.
1. To charge the case, plug the USB cable into a power source and the
micro-USB in the case's port. The case starts charging automatically.
2. Charging the case battery to its full capacity may take about 2 hours.
3. When the battery is fully charged, LED indicators light will become solid
white.
4. Proceed to place the earphones on the sockets of the charging case. Their
built-in batteries are automatically charged as long as they remain inside the
base.
5. While the earphones are being charged, the red indicator on each side lights
up. When fully charged, the LED will turn off. This process will normally take
about an hour.
6. The fully charged buds have power for up to 5 hours of playback time or up
to 120 hours of standby time. However, these times may vary depending on
the mobile device used, on the usage profile, and on the listening habits of
each individual user.
7. The low battery prompt will be heard to let you know that their voltage is
below the acceptable level to continue operating properly.
4.2. Turning your earphones on or off
1. To turn your earphones on you can take them out of the base or press and
hold the Multifunction button on each one for about 4 seconds. The Power
on prompt will be heard, making the LED glow blue on one earphone and
alternate red and blue in the other one.
2. As both earphones synchronize, the Connected prompt will be heard,
followed by the blue LED on main earphone flashing once every 4 seconds.
3. To turn the earphones off, place the earphones back in the case. You can
also press and hold the Multifunction button for about 4 seconds. The
Power off prompt will be heard, making the red LED blink briefly on both
sides upon shutting off.
4.3. Wearing your earphones
- The earphones are intended to fit comfortably in either ear for all day
hands-free wearing.
- Select the tip that best fits the size of your ear canal. Gently push the
earphone into your ear. The earphone should rest securely and comfortably in
your ear when properly inserted.