Cub Cadet GasLess CCT400 Manual De Instrucciones página 22

Sweeping
Use the GasLess
sweeping cut grass and debris from
walkways and driveways. Position the
line parallel to and above the surface to
be swept (Fig. 10). Swing the trimmer
from side to side in a fanning motion.
The air flow from the rotating line will
blow the grass and debris from the
surface being swept.
NOTE: Be careful not to allow the bump
head to contact the ground, as this
could result in damage to the bump
head and/or releasing more trimmer line
from the spool.
Edging
Use the GasLess
around walkways and flower beds.
WARNING:
pants, long sleeve shirt, gloves and
safety goggles and a face shield when
edging. Debris being thrown from the
trimmer at high speed can injure your
eyes and any exposed skin.
Hold the trimmer in a similar manner to
trimming, but with the trimmer head
rotated away from your body by 90°
(Fig. 11).
ADVANCING THE POLYMER LINE
As the trimmer is used, the polymer line
will wear down or the tips will break off.
To advance the polymer line and expose
a greater length, simply tap the bump
head on the ground while the trimmer is
turned ON.
ASSEMBLY AND OPERATING
trimmer for
TM
trimmer for edging
TM
Always use long
Sweeping
22
Fig. 10
Fig. 11