Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY GUIDE
Before first use
Before first use or when the appliance has not been used for an extended
period of time, run a cleansing brew at least once with water only:
1. Fill the Water Tank to the
MAX Fill Line.
• Water Tank can be filled while in
the unit or detached.
2. Place Hot Water Insert into the
Insert Chamber.
• See Hot Water Insert in
Assembly Guide.
3.
Set full-sized Carafe on the
Drip Tray Base.
4.
Press Power to preheat.
5.
Select tea/hot water for the
coffee selection.
6.
Select carafe for size selection.
7.
Select desired temperature.
8.
Press brew.
• Repeat steps 1-8.
10
10
assembly guide
MAX Fill Line
oz
175 F
185 F
205 F
For additional water purification, use the supplied (optional) Charcoal
Filter Holder with Filter.
Note: The BruHub will still operate without
Charcoal Filter Holder installed.
1.
Flush Filter by running under cold tap water for 1-3
minutes before initial use. After flushing, allow the
Filter to drain completely.
2.
Carefully place Filter into compartment and
snap to close.
• Flat side (base) of cartridge must face
down inside Filter Holder compartment.
3.
Insert the Charcoal Filter Holder into the Water Tank. The Filter Holder's
base should sit firmly into the channel.
• Charcoal Filter will last up to 3 months before changing is needed.
11
11
nuwavenow.com
nuwavenow.com
Publicidad
Tabla de contenido
