Installation; How To Install Nanoe™ X Kit For 4-Way Cassette - Panasonic nanoe CZ-CNEXU1 Instrucciones De Instalación

Installation

How to Install nanoe™ X kit for 4-Way Cassette
When installing a new indoor unit, be sure to install the nanoe™ X kit for 4-Way Cassette
before installation of the indoor unit.
(1) Prior to installing the nanoe™ X kit for 4-Way Cassette, remove the following parts from the
indoor unit as shown in the fi gure below.
1 Remove the rubber stopper.
2 Remove the insulator.
After installation of the nanoe™ X kit, these two parts will not be used any more.
(2) Attach the nanoe™ X outlet as shown in the fi gure.
Insert the tip of the nanoe™ X
outlet under the resin.
Fix the nanoe™ X outlet with the
supplied screw.
E
NGLISH
5