Installing the Microphone
Note: Always use the supplied mounting hardware.
Note: The microphone must be positioned properly or the
car kit WILL NOT perform optimally.
1 Mount the microphone in a suitable location using either
screw, velcro, or clip.
• The preferred spot to mount the microphone is on the
overhead console/dome light assembly near the front
center of the vehicle, away from the window, pointed
toward the driver's head.
• Locate the microphone no more than 16 inches (40
cm) from the driver.
• Aim the microphone toward the driver.
• Do not allow anything (such as a rear-view mirror or
sun visor) to block the path between the microphone
and the driver.
• Mount the microphone firmly so that vibrations do not
affect audio quality.
• Refrain from locating the microphone directly in the
path of heat/AC vents.
• Refrain from mounting the microphone on door pillars
or windows that can transmit exterior wind noise to it.
• Microphone should not be attached to the car's visor.
2 Route the microphone cable down the side of the
windshield, through the dash, and to the ECU.
3 Connect the microphone to the ECU.
12
Installing the Handsfree Car Kit