Dmx Input Channel - Work Pro W D 40 K3 Instrucciones De Usuario

EN
EN
Buttons:
•
•
•
3.6.3.
Select with od 512 DMX channel will be assign to the first DMX channel. The rest of
dimmer channels will be assigned consecutively. Therefore, the range of selected channel
will be from 0 to 512.
NOTE: MODIFIY THIS FUNCTION, WILL CANCEL THE PREVIOUS INDIVIDUAL
PATCHING ON EACH CHANNEL
Buttons:
Buttons:
•
•
•
Response: XXXX ms
E-Exit
'MENU' Return to initial display, the changed parameter is not saved in memory.
'ENTER' Go to previous display. The parameter are saved on memory.
.
'<,>' Increase or decrease the value. Continuous touch, change the value.

DMX Input Channel

DMX:
E-Change
• 'MENU' Return to initial display.
• 'ENTER' modify the value The next display is showed.
• '<,>' pass to the next or previous configuration parameter.
DMX:
E-Exit
'MENU' Return to initial display, the changed parameter is not saved in memory.
'ENTER' Go to previous display. The parameter are saved on memory.
.
'<,>' Increase or decrease the value. Continuous touch, change the value.
D 40 K3
<,>
<,>
<,>
User Manual/Manual de uso
PAG. 10