Operating; Slow Preheat; Consigna - Work Pro W D 40 K3 Instrucciones De Usuario

EN
EN

3. Operating

3.1.
3.2.

Slow Preheat

From de initial starting unit to the information visualization in the LCD display, the intensity
in all channels is increase slowly to reach the configured preheat level.,
Levels
During the viewing in the information display, the indicated level will be the output value
on each channel, the maximum level between DMX input and Analog input.
If you need to control the dimmer with DMX or analog and is produced a connection lost,
the last values will be reminded.
In case you need to control in Local or Program mode, the DMX and Analog inputs, will
be ignored.
After to start the unit, the DMX or Analog external values will be zero, until the reception
of new values.
D 40 K3
User Manual/Manual de uso
PAG. 4