Curve Of Response - Work Pro W D 40 K3 Instrucciones De Usuario

EN
EN
3.6.4.
It selects the kind of response curve to be applied/assigned to the input.
The kinds of curve are:
- Lineal: BLUE
- Quadratic: YELLOW
- Quadratic inverse: GREEN
- ON/OFF: change from ON to OFF at 50% with a flange between 45% to 55%
Buttons:
CURVE SELECTION
It allows to select the curve type for each channel individually.
The process is the same that to patch channel
X indicate tle dimmer channel where we apply changes
Mode indicate the curve mode from the four type
Buttons:
•
•
•
Response curve
300
250
200
150
100
50
0
0 50
-50
Curve: CCCCCC
E-Change
• 'MENU' Return to information display.
• 'ENTER' modify the value. The following display is showed
• '<,>' to go to the previous or next parameter of configuration.
Curve X: mode
E-Change
'MENU' Return to initial display, the changed parameter is not saved in memory.
'ENTER' Go to previous display. The parameter are saved on memory.
.
'<,>' To select the kind of curve to be applied.
D 40 K3
100 150 200
Picture 1
<,>
<,>
User Manual/Manual de uso
250 300
PAG. 12