Troubleshooting Guide; Maintenance - Husqvarna Z400 Manual De Las Instrucciones

TRANSPORT
• The machine is heavy and can cause serious crushing
injuries. Be extra cautious when it is loaded on or
unloaded from a vehicle or trailer.
• Use an approved trailer to transport the machine.
Activate the parking brake, turn off the fuel supply, and
fasten the machine with approved fastening devices,
such as bands, chains or straps.
• Check and abide by local traffi c regulations before
transporting the machine on any road.
• Load the unit onto truck or trailer by driving up ramps
of suitable strength using a slow speed. Do not lift! The
machine is not intended to be lifted by hand.
• When loading or unloading this machine, do not exceed
the maximum recommended operation angle of 10
Maintenance Schedule
ITEM
Check/tighten nuts and bolts
Clean machine

Troubleshooting Guide

Problem
Unusual vibration or noise

MAINTENANCE

CLEANING
Regular cleaning, washing, and lubricating will prolong the
service of the machine.
NOTE: Use care with power washers to avoid damage to
decals. DO NOT EXCEED 1000 PSI WATER PRESSURE
FOR CLEANING
STORAGE
Store in a clean, dry place. Covered or indoor storage is
recommended.
O .
BEFORE
EACH USE
X
Solid object jammed in unit
Loose or missing bolts
8
EVERY 5 EVERY 25
HOURS HOURS
Possible Cause
EVERY 50
HOURS
X