HealthSmart 18-210-000 Manual De Instrucciones página 9

3. Insert the probe VERY gently and slowing into the ear canal.
• Hold the thermometer so the probe faces straight
in the direction of the eardrum, Fig 3.
• It is important to point the probe tip toward the
eardrum and is inserted inside the ear canal until
slight resistance is felt.
• Hold the outer ear and gently pull it up and toward
the back of the head to straighten the ear canal,
Fig 4 & Fig 5.
• Always insert the thermometer into the same ear
with the same direction and depth.
4. Press and hold the SCAN button. The thermometer take a
reading and make a 'beep' sound, indicating the measure-
ment is complete.
5. Remove the thermometer from the ear canal. The
thermometer will display the result on the backlit LCD
screen.
NOTE: After each measurement "
display above the measurement. Once the
" " disappears (approx. 6 seconds), a new
measurement can be taken, Fig 6.
6. After the test is complete, press the M (Memory)
button or wait 1 minute for the display to
return to standby mode and display the
ambient temperature. After 1 minute in standby
mode, the thermometer will automatically
shut OFF.
NOTE: The LED light between the Memory and Settings button will illuminate
according to the temperature reading.
• GREEN = 93.2°F ~ 100.3°F (34.0°C ~ 37.9°C)
• RED = 100.4°F ~ 109.3°F (38.0°C ~ 42.9°C)
• LO = < 89.6°F (32.0°C)
• HI = > 109.3°F (42.9°C)
" will
9
FIG. 3
FIG. 4
0"~2"
FIG. 5
FIG. 6