FIM M Serie: C Serie Manual De Uso Y Mantenimiento página 23

FUNCTION AND USE
It switches the motor on at speed 2.
It switches the motor off.
It switches the lights on and off.
Where the prolonged pressure varies with the intensity of the light.
It reduces the speed of the motor.
It increases the speed of the motor.
The highest speed of the motor is shown with
speed comes automatically.
TIMER: If pressed for more than 2 seconds when the hood is running at speed 1,
2 or 3, it automatically stops the motor after 10 minutes and the display flashes.
With the timer active, pressing for more than 2 seconds it deactivates.
Additional Functions: INTERVAL FUNCTION
The motor is switched on automatically 5 minutes each hour at the speed flashing in the display.
How to activate:
Press at the same time the push buttons
■
1;
If you press the push button
■
of the motor 2→3→1→2 ...;
Press at the same time the push buttons
■
interval function will be activated.
When you are in the setting phase, if the interval function shown is not confirmed within some
seconds, then you get out of the setting mode for the interval function.
Deactivate: you can deactivate pressing any push button but not the light push button.
AUTOMATIC CONTROL OF GREASE FILTERS AND CARBON FILTERS
The electronic controls with display and rectangular push buttons allow automatic control of the
grease filter and of the carbon filter (only when the hood is used in filtering version) so that the
user does not have to remember when maintanance was last carried out.
When the grease filters must be cleaned, there is
is issued.
When the carbon filters must be replaced, there is the
acoustic signal is issued.
TO PUT THE GREASE AND/OR CARBON FILTER CONTROL BACK TO ZERO
After filter maintanance has been carried out you have to:
Stop the motor (stop position);
■
TOUCH CONTROL WITH DISPLAY PUSH BUTTONS
, the display will show the following numbers for the speeds
and after 4 minutes the second
and , then release them: the display will show
and to confirm the speeds at which the
flashing in the display and an acoustic signal
letter flashing in the display and an
23