FIM M Serie: C Serie Manual De Uso Y Mantenimiento página 24

Press twice in succession the
■
symbol is appearing in the display and a "beep" is issued.
SETTING SUCTION/FILTERING FUNCTION
The hood is delivered standard as a suction hood (saturation indicator
If the hood uses a plasma filter, do not set it in filtering mode.
If you wish to use the hood as filtering (saturation indicator
following:
Press at the same time for ca 5 seconds the push buttons
■
you will have the
To reset the hood just for suction use, repeat the above, in the display you will have the
symbol appearing.
Additional Functions: SECONDARY LIGHT
If you keep on pressing the light Push button
disactivate the secondary lights.
Additional Functions: MICROSWITCH for hoods with movable front parts or drawers
This switch is making the switching on/off operation easier. If you open or close a door or if you
pull out a drawer according to the kind of cooker hood (which is always an advised operation if
the fires are on) the motor is starting at the second speed; all functions of the controls are
allowed.
It switches the motor on at speed 2
It switches the motor off.
It switches the lights on and off.
Where the prolonged pressure varies with the intensity of the light.
It reduces the speed of the motor.
It increases the speed of the motor.
The highest speed of the motor is shown with
speed comes automatically.
TIMER: If pressed for more than 2 seconds when the hood is running at speed 1,
2 or 3, it automatically stops the motor after 10 minutes and the display flashes.
With the timer active, pressing for more than 2 seconds it deactivates.
Additional Functions: INTERVAL FUNCTION
The motor is switched on automatically 5 minutes each hour at the speed flashing in the display.
How to activate:
Press at the same time the push buttons
■
1;
If you press the push button
■
of the motor 2→3→1→2 ...;
push button, to confirm that reset has been made the
symbol followed by an acoustic signal.
TOUCH CONTROL WITH DISPLAY PUSH BUTTONS
, the display will show the following numbers for the speeds
for more than 2 seconds you activate/or
and after 4 minutes the second
and , then release them: the display will show
24
).
and ) please do the
and , in the display