Settings - Vimar By-me Guía De Usuario

Settings

2. SETTINGS.
With the Settings menu you adjust the control panel clock, you select the current language and set
the colour of the display and the tones of the buttons.
2.1 Setting the date/time of the control panel.
Setup  Settings  Clock
Set the date and time using the  and  buttons to change the values and  and  to move onto
each item.
On completion, confirm with Save.
ATTENTION: The change from GMT to daylight saving time does NOT happen automatically so it
must be done manually.
2.2 Setting the language on the control panel.
Setup  Settings  Language
The active language is highlighted by the
buttons, confirm with Select
2.3 Setting the display of the control panel and the tones of the buttons.
Setup  Settings  Display and Tones  Contrast and Brightness
This enables adjusting the Contrast, Brightness and Backlighting of the display; use the  and 
buttons to move onto each single item and  and  to change the values, confirm with
and then save with Save
Setup  Settings  Display and Tones  Interface Colour
This enables setting the colour of the display's background; select the desired colour with  and 
and confirm with Select
Lastly, press Save.
Setup  Settings  Display and Tones  Keypad Tones
To silence the tones of the buttons, press Del
Confirm with Save.

character; select the desired language with the  and 

and lastly save with Save.
.
 .

; to restore them press Select

Select

.
37 37