Start Up; Operation; Settings; Frost Protection - Kärcher PT Manual Del Usuario

Operation

1 Throwing in the coin
2 Programme selection button
3 Coin return
4 Hose switch
5 Trigger
6 Spray gun
7 Nozzle
 Insert a coin in the coin slot.
The programme selection but-
tons will flash.
 Press the programme selec-
tion button for the desired fra-
grance.
The selected button will illumi-
nate.
Note:
The selection can be changed
during the run time.
 Remove the spray pistol from
the hose holder.
 Align the spray pistol nozzle on
the object that is to be scented.
Recommendation: Spray the
fragrance under the floor mats.
 Pull the spray gun lever.
 Let go of the lever to end the
spraying procedure.
 Place the hose on the hose
holder.

Settings

Setting the run time
Note:
The adjustable run time applies to the in-
sertion of one of the following coins:
– 50 Eurocents
– 50 British pence
– 1 Swiss franc
– 1 Polish złoty
– 5 Norwegian Kroner
Customer Service can set up different
types of coins.
1 Rotary knob
 Adjust run time per unit at rotary knobs
P I through P IV.
Possible setting range: 30 seconds to
7 minutes.

Frost protection

Device with frost protection
1 Frost protection switch
2 Frost protection heater
 Turn the frost protection switch "ON" at
temperatures below +5 °C.
ATTENTION
Risk of damage due to frost. The frost pro-
tection heater is active only when the main
switch is also "ON".
Device without frost protection
In a device without frost protection, a shut-
down must be carried out if there is risk of
frost

Shutting down

 Set the main switch to the "OFF" posi-
tion.
Shutdown during Frost Conditions
 Remove the fragrance canister from the
device and store it in a frost-free area.
 Set the main switch to the "OFF" posi-
tion.

Maintenance and care

Daily
 Empty the coin cassette (see "Mainte-
nance tasks").
 Check the filling level of the fragrance
canister.
 Check the general condition of the de-
vice.
 Check condition of the hose line.
 Check the nozzle of the spray pistol.
 Have damaged parts replaced.
Weekly
 Clean the external surfaces of the appli-
ance.
2
-
EN
Maintenance Works
Emptying the coin cassette
1 Door
2 Coin cassette
 Open door.
 Remove and empty the coin cassette.
Deaerating the appliance
 Start up the device.
 Allow the programme to run until the
suction hose is free of bubbles and the
fragrance is released at the spray pistol
nozzle.
 Carry out one procedure after another
for each programme.

Troubleshooting

DANGER
Risk of electric shock!
 Set the main switch to "OFF" and dis-
connect the on-board voltage supply
prior to performing any work on the de-
vice.
– The device is not functional.
The "STOP" button does not illuminate.
 Check the on-board power supply.
 Set main switch to "ON" position.
 Inform Customer Service.
– No fragrance is released.
 Check the filling level of the fragrance
canister.
 Check the nozzle of the spray pistol.
 Clean the filter on the suction hose.

Warranty

The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of your accessory within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication. In the event of a warran-
ty claim please contact your dealer or the
nearest authorized Customer Service cent-
er. Please submit the proof of purchase.
Accessories and Spare Parts
Only use original accessories and spare
parts, they ensure the safe and trouble-free
operation of the device.
For information about accessories and
spare parts, please visit www.kaerch-
er.com.
7