Assembly Instructions; Assembly; Adjusting Comfort - Mobility TAURUS Manual De Instrucciones

10

12. ASSEMBLY INSTRUCTIONS

12.1 Assembly

1. Assemble the backrest onto the wheelchair using the
nuts, bolts and covers provided, as illustrated below
2. Install the joystick with its support on the armrest
and tighten the hexagonal screw. After mounting the
joystick, also connect the electrical connector
3. Remove the battery cover and connect the two
electrical connectors present underneath the seat.
Close the battery cover

12.2 Adjusting comfort

Before starting to use your ARDEA MOBILITY electric wheelchair by Moretti, carry out all
the adjustments indicated below to obtain a comfortable driving and seating position suited
to the user.
1. Position of the control joystick
2. Armrest height
3. Armrest width
4. Seat depth
5. Seat width
6. Seat inclination
7. Backrest height
8. Backrest width
9. Backrest inclination
10. Footplate depth
11. Footplate height