Automatic Shut Off - HoMedics BKP-300 Manual De Instrucciones

Caution—Please read all instructions
carefully before operating.
• This product is not intended for medical use. It is intended only to
provide a luxurious massage.
• If you have any concerns regarding your health consult your doctor
before using this product.
• Individuals with pacemakers should consult a doctor before use.
• Never leave the appliance unattended, especially if children
are present.
• Never cover the appliance when it is in operation.
• Do not use this product for more than 15 minutes at a time.
• Extensive use could lead to the product's excessive heating and shorter
life. Should this occur, discontinue use and allow the unit to cool before
operating.
Please Note:
• Never use this product directly on swollen or inflamed areas or skin
For your safety, this
eruptions.
product is equipped
• Do not use this product before bed. The massage has a stimulating
with a pressure effect and can delay sleep.
activated switch to • Never use this product while in bed.
• This product should never be used by any individual suffering from any
control the heat
physical ailment that would limit the user's capacity to operate the
function. Heat will not
controls.
operate unless
• This unit should not be used by children or invalids without adult
pressure is applied to
supervision.
this switch, located on

Automatic Shut Off

the seat cushion of
the unit. Once pressure
We've designed this back massager for convenience and safety. As a
is removed, heat will
special precaution against falling asleep while using the unit, or leaving the
turn off. After applying
unit on while it's still in operation, we've programmed it to automatically stop
pressure, please allow massaging 15 minutes after receiving your last command. To reactivate the
massage cushion, simply press any button. Any time you change massage
5-10 minutes for heat to
functions, the timer will reset. This special feature should not be considered
reach maximum
as a substitute for OFF. Always remember to turn your unit off when not in
temperature.
use.
Instructions for Use
For Use in Home or Office
Plug adapter into a 120 volt AC outlet and plug the receptacle end into the
input jack, located along the side of the cushion. Attach the massage
cushion to most chairs for a luxurious massage as you read, rest or even
work.
4
For Use in Your Car
Simply plug the 12 volt auto adapter into a 12 volt outlet and plug the
Note:
receptacle end into the input jack, located along the side of the cushion.
Not recommended
Slip the massage cushion straps over your seat to enjoy a relaxing massage
for use on wooden
as you drive.
surfaces as the
Strapping System
zipper may
This back massager incorporates a unique strapping system which allows
damage the
you to fasten it to most any chair or auto seat. Just slip the straps over the
wood. Caution is
seat or chair and adjust the convenient hooks to fit. Your massager won't
also recommended
slip or slide away.
when using in
Maintenance
upholstered
furniture.
To Store
Place massager in its box or in a safe, dry, cool place. Avoid contact with
sharp edges or pointed objects which might cut or puncture the fabric
surface. To avoid breakage, do not wrap the power cord around the unit. Do
not hang the unit by the controller cord.
To Clean
Unplug the unit and allow it to cool before cleaning. Clean only with a soft,
slightly damp sponge. Never allow water or any other liquids to come into
contact with the unit.
• Do not immerse in any liquid to clean.
Caution:
• Never use abrasive cleaners, brushes, gasoline, kerosene, glass /
All servicing of
furniture polish, paint thinner to clean.
this massager
• Do not attempt to repair the massager. There are no user serviceable
must be
parts. For service, send the unit to the HoMedics address listed in the
performed by
warranty section.
authorized
Note -
This equipment has been tested and found to comply with the limits for
HoMedics service
Class B digital devices, pursuant to part 15 of the FCC Rules. These limits are
personnel only.
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note - The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such modifications
could void the user authority to operate the equipment.
5