Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3. Measurements
It should be checked that the item to be measured is voltage free.
Before starting with the measurements, be sure that the battery is well
charged.
1.
Choose the power supply to use. If you are going to use the mains
supply, plug the power cord into the connector
2.
Before turning the equipment ON, connect the test leads to the item
to be measured and to the front panel terminals.
3.
Switch the equipment ON using the On/Off
4.
The following message will appear on the display
5.
And then:
6.
Using the buttons 1 A
the range and the current to be used.
PRECAUTIONS
PRESS START
, 100 mA
11
.
.
:
MO-2Ke
, 10 mA
or 1 mA
, choose
Publicidad
Capítulos
Tabla de contenido
