Printer; Paper Feed; Paper - TENTECH MO2Ke Manual De Uso

7. Printer

Pressing the printer
display.

7.1. Paper feed

The switch, which is a blue key located in the left upper part of the
printer body, is the Paper feed control. Press this key 3 times after the
test is finished and before cutting the paper, in order to visualize the last
lines.
ATTENTION : Do not pull the paper. Never try to put the paper back into
the printer. In any of these cases, the printer may be easily damaged.

7.2. Paper

This printer uses 37 mm - wide thermal paper, which comes in a 33 mm-
diameter reel. The figure shown below indicates how to put the paper.
Press the key, (until the paper appears). To remove the old paper reel,
cut the paper next to it and press the
operation must be carried out in this way due to the fact that the paper
movement is in one-way only, that is, the paper can be moved in one
direction only.
key will print the measured value shown in the
White side
Yellow
side
15
key. The removal used-reel