Assembly - Klarfit Kiddy King Manual De Instrucciones

EN
40

ASSEMBLY

Assembly of the trailer
Remove all parts of the trailer from the box. Lay the trailer flat on the
1
floor.
To open the frame, pull the trailer upwards by the handlebars until
2
the trailer is partially unfolded.
3 Open the storage compartment at the rear.
While holding the frame in the raised position, pull the seat frame
4
(see arrow) towards you at the rear.
When you have pulled the seat all the way back, close the latch on
5
each side of the frame (see below) to secure the frame.
6 Check that both latches are firmly engaged.