Conditions And Limitations; Exceptions; Liability; Procedure - Lofrans 74317 Manual De Instalacion Y Uso

www.lofrans.com

6.1 Conditions and limitations

1. Lofrans' does not assume any responsibility for an incorrect choice of product made by the
purchaser.
2. The responsibility of Lofrans' shall be limited to the repair or replacement of all parts of the product
that originally present material and/or manufacturing defects.
3. Lofrans' shall not in any way be liable for faults or any consequent damage originating from:
- use of the product in applications for which it was not designed;
- corrosion, degradation caused by ultraviolet rays and wear;
- failure to follow the maintenance schedule;
- incorrect or unsuitable product installation;
- any modification or alteration of the product;
- conditions of use exceeding the product specifications.
- The warranty does not cover the additional costs borne for interventions, removal, transport
and installation of the product;
- The warranty is cancelled if maintenance is carried out by people not authorized by Lofrans'.
- Lofrans' products are designed to be used only in the marine environment. Lofrans does not
assume any responsibility deriving from other uses.
- Lofrans' reserves the right to not acknowledge this warranty if the electromechanical
products are operated by unsuited electrical accessories and/or in the case of failure
to install an appropriate overload cutout switch on the electric power line.

6.2 Exceptions

Coverage under warranty is limited to a period of 1 year from the date of purchase by the original
purchaser for:
- Electrical boards
- Gaskets and seals
- All the products used on charter boats.

6.3 Liability

This warranty does not cover any loss or damage caused to the purchaser by the ascertained non-
conformity of the product, except for the case of fraud or gross negligence of Lofrans' declared with
a court ruling.
Some states and countries do not allow the exclusion or limitation of incidental or consequential
damages, so the above-stated limitations or exclusions might not be applicable.

6.4 Procedure

The warranty application must be notified to Lofrans website http://www.lofrans.com/warranty.php by
filling all the necessary fields, including the serial number of the control.

6.5 Termination clause

If any clause of this warranty is invalidated by a judge or other competent authority, the validity of the
remaining clauses of this warranty and the rest of the clause in question will not be affected.

6.6 Conformity

This warranty is governed by the laws and in conformity with Italian laws.
The Court of Milan has jurisdiction over all disputes.
UK
9