SmartThings (available only with the optional adapter)
Installation
Visit the Google Play Store, Galaxy Apps, or Apple App Store and search for "SmartThings".
Download and install the SmartThings app provided by Samsung Electronics to your smart
device.
NOTE
• The SmartThings app is designed for Android 6.0 (Marshmallow) or later, iOS 10.0
or later, iPhone 6 or later, and is optimized for Samsung smartphones (Galaxy S and
Galaxy Note series).
• For improved performance, the SmartThings app is subject to change without notice, or
discontinued support according to the manufacturer's policy.
Samsung account
You are required to register with a Samsung account to use the app. If you don't have a
Samsung account, follow the app's onscreen instructions to create a free Samsung account.
Getting started
1. Insert the Smart Home Adapter into the corresponding port of your refrigerator.
2. Run the SmartThings app and log in with your Samsung account. iPhone users are
required to provide the login information each time they access the app.
3. Access Add Device and then tap Refrigerator.
4. Follow the onscreen instructions to provide the necessary information about the
router, and then tap Next.
5. Press and hold Fridge for more than 5 seconds until the "AP" message appears on the
display. Your refrigerator will be registered with the app.
6. When device registration is complete, the refrigerator icon will appear on the
SmartThings app.
7. Tap the refrigerator icon to open the refrigerator page.
8. When a network connection is established, the Wi-Fi icon lights up on your refrigerator.
Refrigerator app
Integrated control
You can monitor and control your refrigerator at home as well as while on the move.
• Tap the refrigerator icon on the SmartThings to open the refrigerator page.
• Check the operation status or notifications for your refrigerator, and change options or
settings if necessary.
NOTE
Some options or settings of the refrigerator may not be available for remote control.
Untitled-34 39
English 39
2018-08-30
7:18:21