Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CHANGING THE PLATES
There are a variety of plates available for this waffle maker.
1. To change to a different plate, make sure the waffle maker is unplugged and the plates
are completely cool.
2. Slide the two channel covers (part #3) towards the center to expose the posts and release
the plates from the base (part #5).
3. Loosen the screws (part #4) securing the plates to the cover and open the waffle maker.
The plates will detach from the cover. To prevent loss of the screws, do not remove them
completely from the cover.
4. Choose the desired plates. On the back of each plate is a bump/indentation with a hole.
Slide the lug located under the handle (part #2) into the hole. Close the waffle maker and
secure each of the plates with the screws. Slide the plate covers over the plate posts.
5. Open and close the waffle maker several times to confirm everything is tightly secured.
OPTIONAL PLATES AVAILABLE
Belgian Waffle
American-style Waffle Galette/Coffee Waffle
4x6''
6x7''
M001
M002
Toasted Sandwich
Heart Waffle
5x3 ¾''
6''
M005
M006
4
Extra-thin Waffle
6x7
1
/
''
6x7''
4
M003
M004
Waffle Cone
Stuffed Waffle
6''
7x6''
M007
M008
Publicidad
Tabla de contenido
