ratiotec CS 150 Manual De Instrucciones página 8

Control panel
Counting process
Insert the coins in the coin feeder.
Start the counting process by pres-
sing START/STOP. During the coun-
ting process, the quantity of the
CS 150 special:
The CS 150 special is designed for the counting and sorting of only 5 types of Euro coins. Please note
that only the following types of coins can be counted and sorted by the machine: 10 cent, 20 cent, 50
cent, 1 Euro and 2 Euro. Other types of coins cannot be counted correctly and may therefore lead to
incorrect counting results.
SET function
By using the SET function it is possi-
ble to count a preset number of coins
(e.g. 10 pcs) from a bigger amount of
coins, for instance to prepare coin
rolls. Press and hold SET for 2 se-
conds to open the SET overview. The
denominations will be displayed on
the left side, the amount set for the
SET can be seen in the middle co-
lumn and the right column shows the
quantity counted. Select a denomi-
nation and set a SET amount from 0
to 999 by using the number keys. By
Print counting results
By pressing the printing key an
overview of the counting results will
be printed through the printer con-
8
6
7
counted coins and the total sum will be shown on the display.
You can stop the counting process with the START/STOP key.
In order to delete the counting results, press the C key for a
short time. After switching off the machine, the counting re-
sults will be deleted automatically.
pressing C, the SET amount will be reset to zero. Use SAVE to
confirm your settings and close the overview. Activate the SET
function by pressing SET. The top middle part of the display
will show "Bat".
When the SET amount is reached during the counting process,
the machine will automatically stop. Remove the coins from
the correspondent coin cup and continue the counting pro-
cess with START/STOP.
To deactivate the SET function, press SET. The SET amounts
will remain saved and can be used again when activating the
SET function again by pressing SET.
nected. The receipt shows the quantity and value for each de-
nomination, the total quantity and value and the current time/
date.
1. Printing key: Print counting results.
1
2
3
2. Up / Down:
3. SAVE:
4
4. SET:
5
5. START/STOP: Start/stop the counting process
6. C:
7. Number keys: Set the SET amounts, time
Hold: Open the settings
menu of the real-time clock.
Navigate in the SET overview
Save SET amount.
Press: Activate / deactivate
the SET function.
Hold: Open the SET overview.
Delete the counting results,
delete the SET amounts.
and date.