Care And Maintenance - Zonair3D PURE AIRBOX Manual De Usuario

Care and maintenance

Pure Airbox is a unique product that uses a high-quality design and materials.
Please read the following instructions for keeping your equipment in the best
possible condition:
CLEANING AND MAINTENANCE
·
Unplug the equipment from the power supply before cleaning or performing
its maintenance.
· Use a wet cloth for general cleaning.
· Do not use solvents nor abrasive materials that could damage its surface.
·
The fan of the Pure Airbox does not require maintenance.
·
Do not try to repair or adjust any mechanical part of the equipment.
REPLACEMENT OF FILTERS
Pure Airbox is supplied with the pre-filter and absolute filter installed. The
GRSystem filter is packed separetely and should be installed.
They are easy to replace.
For optimum operation of the equipment under normal conditions, Zonair3d
recommends the following filter replacement plan:
Before disassembling any panel, check that the unit is not switched to the electric
power network.
IMPORTANT: Use a mask to replace the filters. It is also recommended to use gloves
and glases to avoid any contact with adsorbed substances.
FILTER
Pre-filter (F7)
GRSystem | Zonair3d
Absolute filter H14
REPLACEMENT
Every year
Every 2 years
Every 4 years